Evaporative
Cooling and More! Evaporative Cooling Pads, Coolers, PreCoolers and
More...
ATEC/Indirex HaveACoolDay.com
Phone 303.816.7075 Fax 303.838.9651
|
ATEC/Indirex HaveACoolDay.com Phone 303.816.7075 Fax 303.838.9651
|
|
Quick Shipments: Most products in Stock! Charge by Phone or Fax! with Visa or MasterCard Call 303.816.7075 Fax 303.838.9651
|
Swamp Cooler Replacement Pads [Munters CELdek 5090 Literature]
Tired of replacing your aspen pads and synthetic pads in your "swamp cooler" every season? Put the experience and success of Commercial/Industrial evaporative coolers in your swamp cooler! 2" (for standard swamp coolers) or 3" thick rigid cell media pads have smaller flute sizes (~3/16" flute vs the standard ~1/4" flute height) to increase performance - with a distribution header retrofitted into an existing cooler will give you longer lasting (usually 3-5 times longer life expectancy) more consistent performance in your swamp cooler. Sizes available (usually in stock for quick shipment - freight paid in the continental USA*): CELdek 5090 45/45 Media 2" thick x 12" wide x 18" high $9.57 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 2" thick x 12" wide x 24" high $12.09 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 2" thick x 12" wide x 36" high $16.63 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 2" thick x 12" wide x 48" high $21.17 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 3" thick x 12" wide x 18" high $13.60 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 3" thick x 12" wide x 24" high $17.13 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 3" thick x 12" wide x 36" high $24.20 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 3" thick x 12" wide x 48" high $30.76 per piece (Freight Paid*) Note: minimum 3 pad purchase required
PADS FOR BREEZAIR TYPE UNITS: CELdek 5090 45/45 Media 3-1/2" thick x 12" wide x 18" high $17.63 per piece (Freight Paid*) Note: minimum 3 pad purchase required CELdek 5090 45/45 Media 3-1/2" thick x 12" wide x 24" high $21.67 per piece (Freight Paid*) Note: minimum 3 pad purchase required Sizing: If your unit requires 3.5dx31.5wx17h you would purchase 3pc of 3.5dx12wx18h and cut them to size i.e. 31.5 width = 2pc 12 wide + 1pc 7.5 wide Easy to cut for your specific application with a table saw, band saw or even a hand saw! Order ONLINE or Call 303.816.7075 to place orders
INSTALLATION INFORMATION: |
|
Send mail to
Info@HaveACoolDay.com with questions or comments about this web site.
|
EASY to CUT to SIZE!