Quick Shipments:
Most products in Stock!
Charge by Phone or Fax!
with Visa or MasterCard
Call 303.816.7075 Fax 303.838.9651
Port-A-Cool Maintenance Information
WINTERIZE YOUR PORT-A-COOL® UNIT
With the arrival of cooler weather, now is
the time for owners of Port-A-Cool® units to prepare for cold weather storage of
Port-A-Cool® units. Correct storage is fundamental to keep Port-A-Cool® units
operating at top performance when needed.
FOUR STEPS TO
STORAGE
1) Drain all water
from the sump tank and clean, ensuring that the pads and sump are completely
dry.
2) Clean out the in-line strainer. Remove the spray bar and clean out any
debris. Reinstall after cleaning.
3) Disconnect and roll up any electrical power cords and any hoses so that they
will not be trampled on, tripped over or caught in equipment.
4) Cover the Port-A-Cool® unit completely to prevent dust build-up and store the
unit in a dry area. This also helps prevent damage to the pads for longer pad
life. Covers are available to fit each size unit. Please visit
accessories page for more information.
SUMMERIZE
YOUR PORT-A-COOL® UNIT
By performing the following simple
steps, a Port-A-Cool® unit will continue to produce effective cooling throughout
the summer.
1) Inspect cooling
media for break down, such as sagging or gapping. Clean if dirty. Replace if
needed.
2) Check the fan blade to make sure it rotates freely.
3) Make sure the fan belt is tight and in good condition.
4) Oil the motor if necessary.
5) Check and clean Inline Strainer.
6) Clean Sump Tank and Spray Bar.
7) Pump should be clear of any obstructions.
8) Make sure Drain Valve is closed and spray Bar Adjustment Valve is open
(approximately 3 turns).
9) Determine if water and power source are adequate.
10) Fill reservoir before turning pump “on.”
11) Make sure Float Valve operates properly.
for more information and downloads