Quick Shipments:
Most products in Stock!
Charge by Phone or Fax!
with Visa or MasterCard
Call 303.816.7075 Fax 303.838.9651
Featuring: Munters GLASdek® Evaporative Cooling Media
In Stock for Quick Shipment
Fire Rated Evaporative Cooling and Humidification Media
[GLASdek
Literature] [GLASdek MSDS
Sheets] [CELdek Literature]
[CELdek MSDS Sheets]
Key Benefits
 |
Fire rated UL® 900, Class II |
|
High evaporative efficiency |
|
Self-cleaning design |
|
Simple to maintain |
Made from a flame retardant material fortified with special rigidifying agents
"THE" media choice where strict adherence to fire codes is required
Shallow, unequal angle flute design allows high velocity air flow with minimal resistance and water droplet carryover
Resists clogging caused by dust, sand or other debris
Self-cleaning design directs more water towards the air entering face of the pad to flush away dirt and debris
Unique cross fluted design with unequal angle pads induce highly turbulent air and water mixing for optimal heat and moisture transfer.
TUFedg Protective Edge Treatment available
|
Algae and weather resistant |
|
Extends service life of the pads |
|
Scrubbable |
| Quick ship program: Most orders shipped in less than 3 days! |
| Inventory warehouse located in Colorado. |
Ordering Information:
ATEC/Indirex prices all media on either the square foot or cubic foot basis, therefore it is important to understand the standard dimensional information:
Evaporative Cooling Media 45/15 flute angles with ~1/4" flute height
Standard Media Heights: 18",24",30",36",48",60",72"
Standard Media Depths: 4", 6", 8", 12" (12" media - stock item)
(18" depth = 1pc 12d + 1pc 6d)
Standard Media Widths: 12"
Distribution Pad 45/45 flute angles with TUFedg on two sides
Standard Pad Depth: 2"
Standard Pad Width: 12" (18"W = 12"+6")
Standard Pad Length: 12",18",24",30",36",48",60",72"
All other Depths, Widths, and Heights are cut to order and customer pays drop charge up to next standard dimension.
Useful formulas:
Cubic Feet of Kuul Media = Depth (Inches) X Width (Inches) X Height (Inches)
1728
Square Feet of Distribution Pad = Width (Inches) X Length (Inches)
144
Example:
Evaporative Cooler Unit Dimensions:
Depth = 18" (in direction of airflow) a standard dimension
Width = 126" standard width = 12" or 24" next standard increment of width = 132"
Height = 68" including 2" dist. pad standard height = 72" cut media to 66"H
Media cubic feet = (18" X 132" X 72") / 1728 = 99.0 cubic feet
Distribution Pad square feet = (18" X 132") / 144 = 16.5 square feet
We would be glad to send you more information or a sample to test.
* GLASdek is a registered trademark of Munters Corp - GLASdek descriptions come from Munters literature MB-GDB-0412